Toshiba EO1-33057 - Manual (Page 101)

4. MAINTENANCE
ENGLISH VERSION EO1-33057
4.1 Cleaning
E4- 3
4.1.2 Pinch Roller (Cont.)
9. Take out the Pinch Roller Ass’y from the printer.
10. Wipe the Pinch Roller Ass’y with a soft cloth slightly moistened
with absolute ethyl alcohol.
11. After cleaning the Pinch Roller Ass’y, place it in position, and raise
the both Pinch Roller Plates.
CAUTION!
When re-installing the Pinch
Roller Ass’y on the printer,
remove the slack of the Ribbon
End Sensor Harness as far as
possible by pushing it into the
opening (indicated by the arrow).
Failure to do this may cause the
harness to be caught by the
Ribbon End Sensor Plate,
resulting in a printer failure.
Pinch Roller
Ass’y
Pinch Roller Ass’y
Pinch Roller Plate
Pinch Roller Ass’y
Ribbon End Sensor
Harness