True Manufacturing Company ES9.0 - Manual (Page 71)

ES9.0 Recumbent Bike Owner’s Guide
71
Getting Into Setup Mode
chapter Fourteen: Setup Mode
How to
Get Into
Setup Mode
Press and hold .
Begin pedaling the bike, or power up with external power.
At the five-digit “Pass Code” prompt, enter 1 0 1 0 1 . If you
make a mistake, start entering the code from the beginning.
Press .
The first Setup Mode screen will be displayed. Pressing
will switch to the second screen.
Press to accept each parameter and move to the next
one.
When you’re done making changes, let the bike power all the
way down (the orbiting LEDs on the front overlay will go out).
The changes will take effect the next time the bike powers up.