Topfield TF6000F - Manual (Page 42)

38 Firmware Update and Data Transfer
1. Download a new firmware applicable to the digital re-
ceiver from the Topfield website.
2. Download TFD-Down from the Topfield website.
3. Plug a RS232 cable into the RS232 port on the digital
receiver and the corresponding port on your computer.
4. Turn on the digital receiver.
5. Run TFD-Down.
How to use TFD-Down is as follows.
1. Press
✄
✂ ✁
Find button to select the new
firmware file.
2. Press
✄
✂ ✁
Download button to start the file
transfer.
3. Press
✄
✂ ✁ Stop button to cancel the file trans-
fer.
6.1.3 From another Digital Receiver via RS232 Port
It is possible to transfer a new firmware to the digital receiver
from another digital receiver connecting them by a RS232 ca-
ble to update the firmware only if they are the same model.
How to update the firmware with this method is as follows.
1. Plug a RS232 cable into the RS232 port on the digital
receiver and the other’s.
2. Turn on them.
3. Select the Installation > Transfer Firmware to Other IRD
menu .