Perreaux SILHOUETTE SXD2 - Manual (Page 13)

12
Note: Use a 75Ω digital interconnect cable equipped with BNC
connectors to get the best possible digital performance.
Using the supplied adaptor to convert the BNC output to
RCA will not degrade the signal any more than if an RCA
connector was fitted by default.
Universal Serial Bus (USB) Input
USB input from computer, accepts a standard Type B USB
connector. For more information on input specifications, please
refer to Chapter 11.
Input Selector Switch
Selects between the coaxial digital input and USB input.
Serial Number/Voltage Label
The serial number is unique to your SXD2. Please record this
number and store it in a safe place. For any service related
enquiry, please be prepared to quote the product serial number to
Perreaux personnel or their authorised service representative.
The voltage displayed in this area is the ONLY ONLY ONLY ONLY voltage
that can be accepted by the unit.
Caution! Never attempt to connect the unit to the incorrect voltage.
AC Mains Input
An IEC-standard mains input is provided at the rear of the unit.
The AC cord set is removable, allowing it to be upgraded at your
will.
On/Off Switch
When operating the switch down, power is applied to the SXD2.