TechniSat ST 6002 S - Manual (Page 27)

TechniSat ST 6002 S
7.3.3 . Setting the Timer
1. Move the cursor to “Program timer events” and then press
ENTER. Select Event 1 and press ENTER.
2. Use the buttons to move the cursor to “Channel” and
with the buttons select the required channel. The name
of the respective satellite is automatically called up. You also
have the option of entering the channel no. directly via the key
pad.
3. Move the cursor accordingly from “Month”, to “Day”, “Start”
and “Stop”, entering the data as above using the
keys. You
can also enter the data for the “Start” and “Stop” fields direct-
ly via the key pad ie. enter 2245 for 22.45
4. Finally, in the “Type” field you can enter whether it is a single,
daily or weekly recording. In the case of daily or weekly recor-
dings you must in addition enter the last day on which the recor-
ding is to be made
By pressing ENTER the information will be stored and you will
return to the previous menu. The entered time period is now
labelled with “on”. In this manner it is possible to program up
to 8 different record time settings. If overlapping times are ente-
red, the receiver picks this up and does not accept them. To
delete a record time slot press CNCL.
NOTE: having programmed a record time setting you should
not switch off the receiver at the mains, otherwise a recording
is not possible. To switch the ST 6002 S on and off use only
the stand-button.
28
E N T E R
E N T E R
E N T E R