Taylor AB-1000-BL - Manual (Page 6)

6
USING YOUR BLENDER & SMOOTHIE DISPENSER
BEFORE FIRST USE
•
Make sure the voltage in your outlet is the same as the voltage indicated on
the appliance. This product is for 120 –Volt AC electrical outlet only.
• The Blender & Smoothie Dispenser is equipped with a safety locking system
to increase security during operation. The blending function will not work if
the jar, blades and cover are not properly locked in place.
• Remove any bags, labels or stickers from the appliance.
• Clean the base unit with a damp soft cloth.
• Wash all of the removable parts – jar, lid, filler cap, dispenser, dispenser lever
and drip tray using a sponge, warm water and mild dish detergent. Rinse and
dry carefully.
• NOTE: do not immerse the base unit in water when cleaning.
HOW TO USE YOUR BLENDER & SMOOTHIE DISPENSER
• Place the unit on a flat, dry, sturdy surface. This appliance is not for use in
convection, or conventional ovens, microwaves, or on stovetop.
• Wash and dry all components thoroughly as stated above.
• Assemble blender components. Always be sure that the appliance is properly
assembled before using. Blades are extremely sharp; never touch the cutting
edge of blades.
• Make sure the rotary control knob is at the “0” position. Plug the cord into
AC wall outlet.
• Pull the drip tray to the extended position.
• Place jar onto the base.
• Add ingredients to the jar as directed by your recipe.
• Add ingredients to the blender a little at a time to ensure proper blending and
to prevent overflow. Never fill container more than ¾ full; the action of the
blade will cause ingredients to rise in the container. Make larger recipes in
multiple batches.
• Unless the recipe states differently, pour liquid ingredients into the blender be-
fore solid ingredients. Adding the liquid first will reduce blending time.
• Always add 1 cup of liquid before processing ice.
• Place the lid with the filler cap in position onto the jar. Remember; always
hold the handle during blending.
• Turn the rotary control knob to the desired speed for blending.
• After finished blending, turn off by turning the rotary control knob to the “0”
position.
Always turn blender off and wait until blades have stopped
rotating before removing jar.