Redial / call waiting / volume setting, Basic operation, Redial out of range – Toshiba FT-8901 User Manual

Page 16: Call waiting, Handset earpiece volume setting, Handset ringer volume setting, Basics

Advertising
background image

16

BASIC OPERATION

REDIAL

OUT OF RANGE

During a call, as you begin to move too far from the base unit, the
noise increases. Then, you should move close to the base unit. If you
travel out-of-range, your call terminates.(See page 17 “Interference or
static”)

CALL WAITING

To use this feature, you must subscribe to the Call Waiting Service.

1

When you hear a call-waiting tone during your conversation on the
phone, simply press

.

2

To return to the first caller, press

again.

NOTE:

Pressing

without receiving a Call Waiting signal may disconnect the

current caller.

HANDSET EARPIECE VOLUME SETTING

To adjust the earpiece volume, press

during a call.

HANDSET RINGER VOLUME SETTING

To adjust the ringer volume, press

during standby mode.

NOTE:

When the handset is on the base, the handset ringer volume is disabled.

VOL/RING

VOL/RING

FLASH

FLASH

FLASH

Basics

Handset On The Base

1) Pick up the handset and press

.

2) Listen for the dial tone.
3) Press

.

RDL/P

TALK

Handset Off The Base

1) Press

.

2) Listen for the dial tone.
3) Press

.

RDL/P

TALK

FT-8901.qx 1/5/1 11:28 AM Page 16

Advertising