Connecting the power supply and external equipment – Toshiba 20VL43 User Manual
Page 6
SETTING UP
6
Connecting the power supply and external
equipment
Before connecting any external equipment, turn off all main power switches. Make sure that all
external equipment is connected to the TV BEFORE attaching the power supply.
IN
OUT
IN
OUT
the back of your TV
the side of your TV
video recorder
decoder*
IN/OUT
SCART 2 (EXT 2)
Power cord (supplied)
Adaptor (supplied)
Filter
A wide variety of external equipment can be
connected to the back of the TV, therefore the
relevant owners manuals for
all additional
equipment
must be referred to.
We recommend the Scart for a decoder and EXT1 for
a VCR.
If the TV automatically switches over to monitor
external equipment, return to normal TV by pressing
the desired programme position button.
To recall external equipment, press
B
to select
between EXT1 or EXT2.
Please note: Inserting the headphone jack will mute
the sound from all speakers.
WE RECOMMEND THAT YOU USE SCART LEADS IN
ADDITION TO AERIAL CABLES WHEREVER POSSIBLE
Aerial cables:
Connect the aerial to the socket on the rear of the
television. If you use a decoder* and/or a video
recorder it is essential that the aerial cable is connected
through the decoder and/or through the video
recorder to the television.
Scart leads:
Connect the video recorder IN/OUT socket to the TV.
Before running ASM put your decoder and video
recorder to Standby.
The phono sockets will accept video and audio L and R
signals.
*
a decoder could
be Digital Satellite or
any other compatible
decoder.
☛
DO NOT connect a
standard video cable
AND an S-Video cable to
EXT 1 at the same time.
☛
The adaptor will
become hot during
use, this is normal.
ONLY USE
THE
ADAPTOR SUPPLIED
WITH THIS TV
.
!