Customizing the function settings – Toshiba BDX2700KU User Manual

Page 29

Advertising
background image

29

FUNCTION SETUP

Customizing the Function Settings

2. Press / to select Network List, then press OK. A

list of existing wireless networks near the BD player will
appear (It may take several seconds for this list to be
created). For example:

3. Press / to select the desired wireless network, and

press OK to confi rm.

a. If the BD player is connected to an Unencrypted

Wireless Network, a menu similar to the following will
appear:

4. Press / to highlight Connect, and press OK. If the

wireless network is functioning,

icon and a message

“Connection to XXX...Success” will appear on the TV.

5. Press OK to close the message. The BD disc player is

now connected to the network. From now on, when you
turn on the player, it will automatically connect to the
network; there is no need to repeat these steps again.

Note: If you do not see this message, the BD player was
not able to connect to the network.

Manual

WiFi Protected Setup (WPS)

IP Settings

Network List

Connection to the wireless Network which you

I.

select

1. Press / to select Wireless, then press OK to confi rm.

the following screen will appear.

The symbols that might appear next to each listed wireless
network in the network list are as follows:

Category

Icon

Defi nition

Connected

When the BD player is
turned on, it will connect
to the wireless network
displaying this symbol.
Typically, this is the last
wireless network connected
before powering down.

Saved

The wireless network prop-
erties have been saved in
the BD player’s memory.

Wireless Security

The wireless network data
is not encrypted.

The wireless network data
is encrypted; a ‘security key’
must be entered so that the
BD player can share data
over the network.

The wireless network data
is encrypted; the encryption
scheme is not supported by
the BD player.

Wireless Protocol

a

The wireless network sup-
ports 802.11a

b

The wireless network sup-
ports 802.11b

g

The wireless network sup-
ports 802.11g

n

The wireless network sup-
ports 802.11n

Signal Strength

Strong Signal

Good Signal

Medium Signal

Weak Signal

No Signal

b. If the BD player is connected to an Encrypted

Wireless Network, a menu similar to the following will
appear:

4. Press ENTER to activate the on-screen keyboard.

Carefully enter the network password by using the /

/ / to highlight the desired letter on the keyboard,

and then pressing OK. (If you make a mistake, use the
backspace

key to erase the mistake.)

WiFi-me

Connect

WPS Pin

Delete

Cancel

Password

WiFi-me

Press ENTER to open keyboard

Connect

WPS Pin

Cancel

WiFi

WiFi

Network List

WiFi

WiFi-me*

Panda

dlink_media

b

WiFi

g

NTGR 11g

b

WiFi

g

Airport_SN

b g n

a

a

Advertising