Tannoy CYBER-SHOT C902 - Manual (Page 53)

51 Connectivity
3 Select Options > Allow connection .
4 Select Always ask or Always allow .
To pair the phone with a Bluetooth
handsfree for the first time
1 From standby select Menu > Settings
> the Connectivity tab > Bluetooth >
Handsfree .
2 Scroll to a device and select Yes .
3 Enter a passcode, if required.
To pair the phone with more than one
Bluetooth handsfree
1 From standby select Menu > Settings
> the Connectivity tab > Bluetooth >
Handsfree > My handsfree > New
handsfree .
2 Select a device from the list.
3 Enter a passcode, if required.
Power saving
You can save battery power with the
Power save function. You can only
connect with one Bluetooth device
at a time when using Power save.
You must turn this function off if you
want to connect with more than one
Bluetooth device at the same time.
To turn powersave on
• From standby select Menu > Settings
> the Connectivity tab > Bluetooth >
Powersave > On .
Transferring sound to and from
a Bluetooth handsfree
You can transfer the sound to and
from a Bluetooth handsfree using
a phone key or the handsfree key.
To transfer sound
1 From standby select Menu > Settings
> the Connectivity tab > Bluetooth >
Handsfree > Incoming call .
2 Select an option. In phone transfers
sound to the phone. In handsfree
transfers sound to the handsfree.
To transfer sound during a call
1 During a call, select Sound .
2 Select from the list.
Using the USB cable
You can connect your phone to a
computer with the USB cable to transfer
files, synchronize and use your phone
as a modem. For more information
go to the Getting started section at
www.sonyericsson.com/support.
This is only possible with devices that
require access to a secure service.
This is the Internet version of the User's guide. © Print only for private use.