Toshiba RAS-B13GKVP-E - Manual (Page 96)

– 96 –
No.
‡
Part name
Compressor
Procedure
1) Perform work of item 1 of

and
‚
,
ƒ
,
„
,
.
2) Extract refrigerant gas.
3) Remove the partition board.
(ST1TШ4 Ч 8L 3 pcs.)
4) Remove the sound-insulation material.
5) Remove terminal cover of the compressor,
and disconnect lead wire of the compressor
from the terminal.
6) Remove pipe connected to the compressor
with a burner.
• Take care to keep the 4-way valve away
from naked flames. (Otherwise, it may
malfunction.)
7) Remove the fixing screw of the bottom plate
and heat exchanger. (ST1TШ4 Ч 8L 1 pc.)
8) Remove the fixing screw of the bottom plate
and valve fixing plate.
(ST1TШ4 Ч 8L 1 pc.)
9) Pull upward the refrigeration cycle.
10) Remove BOLT (3 pcs.) fixing the compres-
sor to the bottom plate.
* Precautions when assembling the com-
pressor.
Tighten the compressor bolts using a
tightening torque of 4.9 N•m.
Remarks
ˆ
Reactor 1) Perform work of item 1 of
‚
, and
ƒ
.
2) Remove screws fixing the reactor.
(ST1TШ4 Ч 8L 4 pcs.)
Valve
fixing
plate
Compressor
Partition
board
Reactor