Topcom HBM Watch 1010 Elelgant - Manual (Page 11)

11
EN
G
L
IS
H
TOPCOM HBM Watch 1010 Elegant
13.2 CURRENT HEART RATE
Make sure you wear the Heart Rate Belt as described in §6.
Press button A to enter Pulse mode. The current
heart rate is displayed on the upper line of the
display.
The
icon is flashing in the right corner of the
display if a signal is received from the belt. The icon
will freeze and the last recorded heart rate will be
displayed if no signal is received.
For power saving, the HBM Watch 1010 will automatically return to clock
mode if no signal is received.
13.3 % OF MAXIMUM HEART RATE
This is the data showing the percentage of the
Current Heart Rate compared to the Maximum
Heart Rate (MHR by age). It is useful to monitor
your heart performance safely and effectively during
exercise.
13.4 TARGET ZONE GRAPHI-
CAL BAR
This graphical bar is the visual relationship between your Current Heart
Rate and the Maximum Heart Rate.
The bar moves up and down from Below-Zone, In-Zone to Above-Zone
(see §13.1). It is a very important and effective tool to monitor your
workout both safely and effectively.
13.5 TARGET ZONE AUDIBLE ALARM
13.5.1 ALARM SOUND ON/OFF
In pulse mode:
Press button B until you enter Target Zone mode
(ZN).
Press button C to select alarm sound on (
) or off.