Toshiba Camileo X200 - Manual (Page 70)

70
Chapter 11
Troubleshooting
1 If the LCD screen preview is not clear while shooting, how
can the focus be adjusted?
Try switching between Macro and Normal modes.
2 The files on the memory card do not display properly when
the LCD touch screen shows the “!” marking.
The “!” symbol indicates that the SD™ Card is too low of a
speed or contains corrupted files. To solve this problem, format
the SD™ Card using the camcorder instead of a computer
(Refer to
“Format” on page 55 ).
Change the SD/SDHC/SDXC card to a high speed card.
3 Why do some of my indoor pictures look blurry and dark?
The camcorder extends picture exposure time under low-light/
indoor conditions. Keep the camcorder (and the target subject)
steady for several seconds when taking pictures. The shutter
sounds when a picture is taken.
4 How do I charge the battery?
You must use the supplied AC adaptor or the USB cable.
The camcorder must be turned OFF. A blinking light confirms
the camcorder is currently charging. A steady light indicates
that charging has been completed. The light turns off
automatically after battery is fully charged (In AC charging
Mode).