Topcom BUTLER 2450 - Manual (Page 135)

ENGLISH
135
1 INSTALLATION
Before you use the telephone for the first time, you must first make sure the battery is charged
for 20 hours. If you do not do this, the telephone will not work optimally.
For installation, do the following:
• Plug one end of the adaptor into the outlet and the other end into the adapter jack on the
bottom of the telephone.
• Connect one end of the telephone cord with the wall phone jack and the other end to the
bottom of the telephone.
• Open the battery compartment (see below).
• Insert the batteries respecting the (+ and -) polarity.
• Close the battery compartment.
• Leave the handset on the base unit for 20 hours. The Line/Charge indicator
(LED) on
the base unit will light up.
Butler 2450
135
+ -
- +
adapter outlet
telephone connection
wall phone jack
adapter jack
HANDL. B2450_scan.qxd 03-09-2002 17:03 Page 135