Teac SR-LX5i - Manual (Page 18)

18
Select “FM” or “AM” using the
FUNCTION button. 1
Select the station you want to listen
to (auto selection). 2
Hold down the Skip button (.or/)
for more than 2 seconds and release it
when the frequency display begins to
change.
When a station is tuned in, the tuning
process will stop automatically.
< To stop the auto selection, press the Skip
button.
Listening to the Radio
If the reception is poor
For the best reception, rotate the FM or
the AM antenna until you get stations
clearly.
FM MODE button
Pressing this button alternates between
Stereo mode and Mono mode.
Stereo
FM stereo broadcasts are received in
stereo and the “STEREO” indicator lights
in the display.
< If the sound is distorted and the
“STEREO” indicator flashes, the signal is
not strong enough for good stereo
reception. In this case, change to MONO
mode.
Mono
To compensate for weak FM stereo
reception, select this mode. Reception
will now be forced monaural, reducing
unwanted noise.
2 1
Selecting stations which cannot be
tuned automatically (manual selection)
When the Skip button (.or/) is
pressed momentarily the frequency
changes by a fixed step.
Press the Skip button repeatedly until the
station you want to listen to is found.