Toshiba WLT66 - Manual (Page 30)

30
PC settings – picture position, clock phase,
sampling clock, reset
3
3 Use
S or R to adjust until the picture clears.
In the SET UP menu press Q until PC Setting is
highlighted.
Press OK to select, then Q to highlight Clock
phase
.
Use
S or R to adjust until the picture clears.
1
2
The Clock phase matches the PC signal with the LCD
display. Adjusting this can clear horizontal stripes and
picture blur.
Clock phase
In the SET UP menu press Q until PC Setting is
highlighted.
Press OK to select, then Q to highlight Sampling
clock
.
1
2
Adjusting the Sampling clock alters the number of pulses
per scan, this will clear vertical lines on the screen.
Sampling clock Picture position
Connect the PC (as shown in the ‘Connecting a PC’
section) and ensure that a picture is showing on the
television screen. The picture position may now be
adjusted to suit personal preference.
Press B to select PC, then select PC Setting
from the SET UP menu.
1
Press OK. Press P and Q to select an option,
then
S or R to adjust the settings.
2
3 Press OK.
In the SET UP menu press Q until PC Setting is
highlighted.
Press OK to select, then Q to highlight Reset.
1
2
To return to the original factory settings.
Reset
SET UP
Language English
Country UK
AV connection OK
PC Setting OK
MENU Back EXIT Watch TV
1/2 PC Settings
Horizontal position 0
Horizontal width – 5
Vertical position 0
Vertical height – 5
Clock phase 0
Sampling clock 0
MENU Back EXIT Watch TV
1/2 PC Settings
Horizontal position 0
Horizontal width – 5
Vertical position 0
Vertical height – 5
Clock phase 0
Sampling clock 0
MENU Back EXIT Watch TV
2/2 PC Settings
Reset OK
MENU Back EXIT Watch TV
g g