Adjusting the picture, Selecting the picture mode, Adjusting the picture quality – Toshiba 32HL17 User Manual

Page 42

Advertising
background image

42

HL17 (E/F) Web 213:276

Chapter 6: Using the TV’s features

Adjusting the picture

Selecting the picture mode

You can select your desired picture settings from four different
modes, as described below.

To select the picture mode:

Press

u on the remote control.

The following popup menu appears on-screen.

Press B or b to select the picture mode you prefer and
press

T.

To select the picture mode using the menu system:

1

Press

Y and open the Video menu.

2

Highlight Mode and press

T.

3

Press B or b to select the picture mode you prefer and
press

T.

Note: The picture mode you select affects the current
input only. You can select a different picture mode for
each input.

Adjusting the picture quality

You can adjust the picture quality (Contrast, Back Light,
DynaLight™, Brightness, Color, Tint, and Sharpness) to your
personal preferences.

* Back Light

This feature adjusts the brightness of the entire screen. When in
video mode and no signal is input, this will automatically be set to 0.
(Settings are stored in memory.)

**DynaLight

This function automatically strengthens the black coloring of dark
areas in the video according to the level of darkness.

To adjust the picture quality:

1

Press

Y and open the Video menu.

2

Highlight Picture Settings and press

T.

3

Press B or b to select the picture quality you want to
adjust (Contrast, Back Light, DynaLight,
Brightness, Color, Tint, or Sharpness), and then
press C or c to adjust the setting, as described in the table
above.

4

To save the new settings, highlight Done and press

T.

You can use any of the picture modes (- “Selecting the
picture mode,” above left) as a starting point for adjusting
the picture settings.
To revert back to the base mode that you began adjusting
the picture settings from, highlight Reset and press

T.

The picture qualities you adjusted are automatically saved in
the Preference mode (- “Selecting the picture mode,”
above left) until Reset is selected.

Mode

Picture Quality

Sports

Bright and dynamic picture (factory setting)

Standard

Standard picture settings (factory setting)

Movie

Lower contrast for darkened room (factory
setting)

Preference

Your personal preferences

Sports

Standard

Movie

Preference

Mode

Picture Settings

Noise Reduction

Video

Game Mode

Theater Settings

Off

Sports

Sports

Standard

Movie

Preference

Selection

Pressing

C

Pressing

c

Contrast

lower

higher

Back Light*

darker

lighter

DynaLight**

On/Off

On/Off

Brightness

darker

lighter

Color

paler

deeper

Tint

reddish

greenish

Sharpness

softer

sharper

Done

On

Picture Settings

Contrast

100

DynaLight

Back Light

100

Brightness

Reset

50

50

0

Mode: Sports

Color

Tint

Advanced Picture Settings

50

Sharpness

Picture Settings

Mode: Preference

Contrast

70

32HL17_EN.book Page 42 Tuesday, April 24, 2007 11:06 AM

Advertising