Toshiba 32WL55T - Manual (Page 22)

22
Basic oper
ation
Toshiba 32WL55A/E/T (E)
Picture quality adjustment
Basic operation
Picture quality adjustment
To select the picture mode:
You can select the picture quality instantly among three preset
modes and one user-set mode.
• Press the button to select
the desired picture quality.
Dynamic, Standard, Mild and
Memory (user-set) can be selected
cyclically.
Note:
In the PC input mode (see page 29), you cannot be available this
mode.
To adjust the basic picture quality:
Press the MENU button, then
press the or button to
display the PICTURE menu.
Press the or button to
select the Picture settings
menu, then press the OK
button.
Press the or button to
select Back light, Contrast,
Brightness, Color, Tint or
Sharpness, then press the or
button to adjust the level.
Note:
The Tint may only be adjusted on a tape
which has been recorded and played back
on an NTSC VCR.
DVD
MENU
P
P
2 1 3
5 4 6
8 7 9
VCR
TV
DVD
0
OK
CALL
MENU EXIT
Dynamic
Contrast 100
Tint
Color
Back light
MENU Back Watch TV EXIT
100
50
0
0 Sharpness
Contrast 100
Picture settings 1/2
Brightness 50
Mode Picture quality
Dynamic bright and dynamic picture
Standard standard picture
Mild soft picture
Memory the picture quality you set
Selection Pressing
Back light darker lighter
Contrast lower higher
Brightness darker lighter
Color paler deeper
Tint reddish greenish
Sharpness softer sharper
#01E20-28_32WL55AET 4/22/05, 10:54 AM 22
Black