Toshiba W-522 - Manual (Page 26)

26
Timer Programming Procedure
Example: To record cable channel 25 in the SP tape speed from
9:20 p.m. until 10:00 p.m. on August 30. Today is August 25.
1
Load a cassette with the safety tab attached.
2 Press PROG. to display the MENU screen.
3
Select “PROGRAM” using FF or
REW, and press ENTER.
4 Move to the next using FF, and
select the channel number 25 by
pressing
number buttons 2 and 5,
PLAY or STOP.
• You can make “L1/L2”(For W-528/W-522 only) or “ L” (For W-422 only)
appear on the channel number position by pressing I.SELECT depending on
your connection (See pages 13).
To make corrections:
Press
REW to move back to the item, or FF to forward.
(Continued)
RECORDING
SLOW PAUSE/STILL
REC TIMER
TV VCR POWER
I.SELECT
SP/ SLP DISPLAY
TV VOL
COUNTER
PROG. CANCEL
REMAIN/ RESET COUNT
EJECT
CM SKIP
A.SELECT
1 2 3
6 5 4
100
9 8 7
0
F F REW
PLAY
ENTER
STOP
Number
buttons
10
2,9
PLAY
FF
ENTER
STOP
REW
Timer Program Recording
The programmable timer allows you to record up to 6 different programs over one month.
Preparation
• Select the video channel (3 or 4) or video input mode on the TV.
• Make sure that the clock is set correctly (page 16).
• Store the channels on the VCR (pages 17 and 18).
W-528 522 422 eng (25-29) 2/28/02, 2:31 PM 26