Toshiba SD-4700 - Manual (Page 22)

23
Connections
Connecting to an amplifier equipped with a digital audio input
2 channel digital stereo
You can enjoy the dynamic sound of 2 channel digital stereo by connecting an
amplifier equipped with a digital audio input and speaker system (right and left
front speakers). • Make the following setting.
On-screen display Select: Page
“PCM” “Audio Out Select”
Amplifier equipped with
a digital audio input
Connect either.
To OPTICAL
type digital
audio input
Optical digital cable
75 Ω coaxial cable
To COAXIAL
type digital
audio input
Connecting to an amplifier equipped with 5.1ch audio inputs
5.1ch surround sound
The Dolby Digital decoder equipped with this DVD player enables you to obtain
the full benefit of 5.1 channel sound tracks when you connect the DVD player to
an amplifier equipped with 5.1 channel audio inputs.
• Use DVD video discs encoded via
the Dolby Digital recording
system.
• Make the following setting.
On-screen display Select: Page
“Analog 6ch” “Audio Out Select”
Recording system
Audio cable
Amplifier equipped with
5.1ch audio inputs
To 5.1ch audio
inputs
To 5.1CH
SURROUND
AUDIO OUT
2 channel sound is output in the Dolby Pro
Logic format. To obtain the original 2
channel sound, select “Bitstream” or “PCM.”
D/MPEG 42 S SELECT
P I
VIDEO OUT AUDIO OUT
SUBWOOFER SURROUND FRONT
CENTER
COAXIAL OPTICAL DIGITAL
L
R
5.1CH SURROUND 2CH BITSTREAM / PCM
VIDEO
Y
PB
PR
S SELECT
P I
VIDEO OUT AUDIO OUT
SUBWOOFER SURROUND FRONT
CENTER
COAXIAL OPTICAL DIGITAL
L
R
5.1CH SURROUND 2CH BITSTREAM / PCM
VIDEO
Y
PB
PR
56
59
56
59