Topcom SOLOGIC T101 - Manual (Page 5)

Sologic T101 5
Sologic T101
ENGL
ISH
7 Getting started
7.1 Making a phone call
To make a phone call, pick up the receiver. Enter the telephone number.
7.2 Handset volume
The handset volume can be adjusted (Low, Medium, High) by the handset volume
switch (4) on the right side of the telephone.
7.3 Last number redial
The last dialled telephone numbers are saved in the redial memory.
1.
Pick up the handset.
2. Press , the number will be dialled automatically.
Note: The Redial button can also be used as a Pause button while
entering a telephone number !
7.4 Ringer volume
When you receive a phone call, the unit will ring. The ring volume can be switched
off with the Ringer switch (3)
7.5 Flash Key
Press the Flash button (R) to use certain services as ‘Call Waiting’ (if this service is
provided by your telephone company); or to transfer phone calls when you are
using a telephone exchange (PABX).
8 Memory numbers
You can program 3 memory numbers in the phone’s memory.
8.1 Programming a memory number
• Pick up the handset.
• Press the program button (10).
• Enter the telephone number.
• Press the desired memory button M1-M2-M3.
• Put the handset back on the phone.
8.2 Calling a memory number
• Pick up the handset and press the Memory button M1-M2-M3.
• The programmed number will be dialled automatically.
HL_Sologic T101.book Page 5 Thursday, June 24, 2010 10:51 AM