Cable box set-up, Press prog. to display the menu screen, Select “preset” using ff or rew , and press enter – Toshiba W-608 User Manual
Page 33
33
RECORDING
7
8
0
100
9
6
5
2
3
4
1
STOP
PLAY
FF
REW
100
PLAY, STOP
POWER
(CABLE BOX)
CH
(CABLE BOX)
FF
ENTER
PROG.
REW
I.SELECT
Preparation
• Select the video channel (3 or 4) or video input mode on the TV.
• Set “TV/CATV” on the CH MEMORY screen to “CATV” (page 16).
(Example)
(Continued)
Number
buttons
Cable Box Set-up
1
Press
PROG. to display the MENU screen.
2
Select “PRESET” using
FF or REW, and press ENTER.
3
Select “CABLE BOX/DSS” using
PLAY or STOP, and press
ENTER.
4
Select “NO” or “C.BOX” using
FF or REW according to your
connection type.
NO:
• Type A
• Type C (A/B switch “A”)
• Cable channels will be selected using
CH/TRK on the remote control or
CHANNEL on the VCR.
→
Go to step 8.
C.BOX: • Type B
• Type C (A/B switch “B”)
• Type D
→
Go to step
5
.
5
Select “OUTPUT CH” using
PLAY or STOP, and enter either
of the following according to your connection.
Type B, C: the output channel number of
your cable box using
number buttons
.
(Usually 3 or 4. Check the rear of the
cable box.)
Type D: the line input mode “L1” using
I.SELECT
.
6
Select “CONTROL” using
PLAY or STOP, and set to “ON” or
“OFF” using
FF or REW.
ON: if your cable box is remote-
controllable.
• Cable channels will be selected by CH
(CABLE BOX) on the remote control.
The VCR can change the cable
channel to the desired one when timer
recording or VCR Plus+ C system
recording starts.
→
Go to step 7.
OFF: if your cable box is NON remote-
controllable.
• Cable channels will be selected by the
own channel selector of the cable box.
The VCR channel should be set to the
output channel of the cable box.
→
Go to step 8.
3
®
SET UP
PRESET
PROGRAM
USE no c. Box DSS
SET UP
PRESET
PROGRAM
USE no c. Box DSS
OUTPUT CH 02CH
CO
n
TROL Off on
SET UP
PRESET
PROGRAM
USE no c. Box DSS
OUTPUT CH 03CH
CO
n
TROL Off on
E
n
D : PROG
SET UP
PRESET
PROGRAM
USE no c. Box DSS
OUTPUT CH 03CH
CO
n
TROL Off on
BRA
n
D TYPE no. 00
E
n
D : PROG
SET UP
PRESET
PROGRAM
USE no c. Box DSS
OUTPUT CH 03CH
CO
n
TROL Off on
W-608/TSB (ENG)
1/17/01, 11:05 AM
33