Taylor 516 - Manual (Page 3)

1. Press the “Ent” (Enter) button turn the unit on.
2. Your thermometer is preset to read temperatures in
Fahrenheit. To switch to Celsius, press and hold the “S/S”
(Start/Stop) button for 3 seconds.
3. Press the “Ent” button to access the Tea Selection screen.
4. Press the “+” or “-“ button to scroll through 7 types of teas
(White, Green, Oolong, Black, Herbal, Pureh, Darjeeling).
Note: Each Tea Screen displays a flashing Tea Icon, a
temperature, and a time. These indicate the preset hot
water temperatures and steep times associated with
that particular blend of tea.
5. Press “Ent” to select a tea choice. The preset target water
temperature digits blink.
6. Press “Ent” to select the displayed temperature. The steep
timer digits blink.
Note: The target water temperature can be adjusted in
increments of 1°. To change the desired temperature,
press the “+” button to increase or the “-“ button to
decrease the temperature. Press “Ent” to select the
desired temperature when it appears on the screen.
The steep timer digits blink.
7. Press “Ent” to select the displayed steep time. The target
water temperature and steep time are set.
Note: The steep time can be changed.
A. To increase the steep time: Press the “+” button to
increase the minutes. Press the “-“ button to increase the
seconds.
B. To decrease the steep time: Press the “+” button until the
minute digits cycle past “9” back to zero, then continue to
press the button until the desired minute appears. Press the
“-” button until the second digits cycle past “59” back to
zero, then continue to press the button until the desired
seconds appear. Press and hold the buttons to advance the
digits quickly. (The timer will time up to 9 minutes and 59
seconds).
General Operation