Technicolor - Thomson CS580 - Manual (Page 30)

28
EN Selecting Tape Player
Press SOURCE repeatedly to select tape mode.
Playing a Tape
1. In tape mode, press on the cassette door to
open it.
2. Insert a tape into the door and push the door
closed.
3. Press SKIP BACKWARD / SKIP
FORWARD to position the tape to the
desired starting position.
4. Press PLAY to begin playback.
5. Press PAUSE to pause playback.
Tape Counter
You can keep track of tape position with the tape
counter. Press PROG/SET to reset.
Recording
From Tuner
1. Insert a tape into deck.
2. Press SOURCE repeatedly to select Tuner
mode .
3. Press BAND to access the desired radio band.
4. Press SKIP BACKWARD
or SKIP
FORWARD to tune to the station to be
recorded.
5. Press RECORD to begin recording.
6. press STOP
to end recording.
From CD
1. Insert a tape into deck .
2. Press SOURCE repeatedly on the main unit to
select CD then press DISC SKIP on the
remote control or DISC1 / DISC2 / DISC 3 /
DISC 4 / DISC 5 on the main unit to select
the disc to be recorded.
3. Press SKIP BACKWARD or SKIP
FORWARD to select the track to be
recorded.
or
Press PROG/SET to enter program mode.
4. Press RECORD to begin recording.
5. press STOP
to end recording.
From AUX
1. Insert a tape into tape deck.
2. Check that the auxiliary device has been
connected correctly to the AUX connector on
the front of the system.
3. Press SOURCE repeatedly to select AUX mode.
4. Start playback on the auxiliary device.
5. Press RECORD to begin recording.
6. Press STOP
to end recording.
From USB
1. Insert a tape into deck.
2. Press SOURCE repeatedly to select USB
mode.
3. Press SKIP BACKWARD or SKIP
FORWARD to select the track to be
recorded.
You can also use MusicMatch Jukebox to
select the desired track.
4. Press RECORD to begin recording.
5. press STOP
to end recording.
Tape Player
CS580 EN 6/10/04 2:25 PM Page 33