ToCAD 9002TM - Manual

Sunpak
9002TM Tri-Monopod
The 9002TM is one in a new line of Sunpak Tri-
Monopods which allows the photographer to
have greater usefulness without carrying extra
equipment. Tri-Monopods can be set up as full
size tripods or can be used as a monopod if the
situation arises. The 9002TM is designed for
today’s latest DSLR cameras with large zoom
lenses. Some of the features that it offers
include a 3-way fluid-effect pan head with quick
release plate, built-in bubble level, leg braces for
added stability and rubber feet with retractable
leg spikes. This tripod comes with a limited
lifetime warranty.
Highlights
ToCAD America Inc. 53 Green Pond Road Rockaway, NJ 07866, USA tocad.com
• Designed for today’s latest DSLR cameras with large zoom lenses
• Converts from a full size tripod to a monopod in seconds
• 3-way fluid-effect pan head with quick release plate
• Built-in bubble level
• Leg braces with locking collar for added stability
• Flip lock leg locks with D-shaped legs for enhanced support
• 1/4”-20 threaded screw at the bottom of the center column tube
• Retractable leg spikes
• Free second quick release plate
• Limited lifetime warranty
Features
Catalog Number
620-090TM
Specifications
• Weight: 3.3 lb
• Load capacity: 6.6 lb
• Maximum height (Tripod Mode): 58 in
• Minimum height (Tripod Mode): 22 in
• Maximum height (Monopod Mode): 61.4 in
• Minimum height (Monopod Mode): 15.75 in
• Leg sections (Tripod): 3
• Leg sections (Monopod) 5
• Leg lock type (Tripod): Flip Lock
• Leg Lock type (Monopod): Twist and pull
Product design and specifications subject to change without notice.