Hyundai H-LCD804 - Manual (Page 11)

11
Note: The time that has been set will return back to the default time (00:00) if you
unplug the unit from its power socket.
d. Attention: press CH- to find th original condition of this item, then press
VOL +/- to make it to zero, press VOL + to add one minute, the max can be 59
minutes, then press the button once more, it comes back to zero. Press VOL - to
add one hour, the max can be 23 hours, then press the button once more, it
comes back to original condition. The unit will alarm you automatically when
the ATTENTION time comes.
e. Ch-Time: press CH+ to find the original condition of this item, then press VOL
+/- to make it to zero, press VOL + to add one minute, the max can be 59
minutes, then press the button once more, it comes back to zero. Press VOL - to
add one hour, the maximum hour can be 23 hour, then press the button once
more, it comes back to original condition. The unit will alarm you automatically
when the booking time comes.
f. Position: press CH +/- to select Position. Press VOL +/- to change channel
number or press 1 to 9 buttons to insert the channel number directly. The unit will
turn on automatically to the preset channel at the preset time.
Note: Adjustment of other items is the same as that ON-TIME, and setup ON-TIME
for all items is 24 hours at the most.
Menu System
Press MENU to enter into menu System . Press CH +/- to select and press VOL +/- to
change setting.
a. Color-Sys: select color system in your country as follows: AUTO, PAL, N3.58,
N4.43, SECAM.
b. Sound-Sys: Select appropriate sound system in your country as follows: 5.5 m,
6.0 m, 6.5 m.
In the System menu, press CH +/- to select Sound system and press VOL +/- to
select appropriate sound system in your country.
c. Blue back: switch on this item. When the receiving signal is very low, you will
see the blue screen.
d. Horizontal: Press the [V+] or [V-] button to turn the picture up to down.
e. Vertical: Press [V+] or [V-] button to turn the picture left to right.
Menu Preset
Press MENU to enter into menu Preset . Press CH +/- to select and press VOL +/- to
change setting.