Toshiba e-Studio Imaging 6520c - Manual (Page 126)

e-STUDIO5520C/6520C/6530C © 2008 TOSHIBA TEC CORPORATION All rights reserved
3-6
3. Printer-specific Adjustments
3.3 To Obtain the Desired Color Balance
Before the adjustment After the adjustment
–
The natural color balance is obtained. The desired color balance is obtained.
(Ex. Yellowness is enhanced.)
‰ Explanation
If you would like to change the color balance or darkness of the printouts and reproducibility of halftones in
accordance with a type of original or the user’s requirements, change the "Image Quality Type" option on the
printer driver or adjust the color balance.
‰ Procedures
* Perform the adjustment in accordance with the procedures below.
* Both the service technician and the user can use procedures (1) and (2).
* Only the service technician must use procedure (3).