Tiller specifications – Troy-Bilt 12190-3HP User Manual
Page 26
26
TILLER SPECIFICATIONS
TILLER SPECIFICATIONS
MODELS
TILLER HEIGHT (with Depth Regulator Lever in highest setting):
12190
12191
12193
Handlebars in lowest setting...................................................................
38-1/4"
38-1/4" 38-1/4"
Handlebars in highest setting .................................................................
47-1/2"
47-1/2" 47-1/2"
TILLER LENGTH
Without Handlebars ................................................................................
38"
38"
38"
Handlebars in lowest setting...................................................................
57"
57"
57"
TILLER WIDTH
Hood Width ............................................................................................
16"
19"
19"
Tilling Width ...........................................................................................
14"
16"
17"
Wheel Width ...........................................................................................
17"
17"
19"
Handlebar Width .....................................................................................
18"
18"
18"
TILLER WEIGHT
Approximate Weight (without oil or gas) .....................................................116 lbs.
133 lbs.
135 lbs.
TRANSMISSION GEAR OIL SPECIFICATIONS
For small top-offs: Use SAE 140, SAE 85W-140, or SAE 80W-90 gear oil with an API rating of either GL-
4 or GL-5.
For Full Replacement: Use SAE 140 or SAE 85W-140 gear oil with API rating of GL-4 (do not use GL-5).