Toshiba Portable MP3 Player User Manual
Page 20
20
Charging via the USB Cable
Connect the gigabeat to the PC via the supplied USB cable.
/
Note
-
If Windows Media® Player 10 is not installed on your PC, the gigabeat cannot
be connected properly. Install Windows Media Player 10 before you connect the
-
Battery power may be used when the gigabeat is operating such as transferring
tracks even if it is connected via USB.
-
Charging with a USB connection is dependent on the performance of the USB
bus power supply function of the PC and may not be possible depending on the
model of PC.
-
When a USB connection is made with a PC that cannot support charging, the
connection may soon be lost and the USB function of the PC may not be available
for use temporarily. If this happens, restart the PC, connect the AC adapter to the
gigabeat, and then once again make a USB connection with the PC.
-
The gigabeat may not be charged when the power of PC is off. Leave the power
of PC on.
-
The gigabeat is connected to your PC when turned on. Refer to
Battery icon display
Battery Status
Charging
Fully charged Charging
completed
To the USB terminal on
the PC