Toshiba E-STUDIO230/280 - Manual (Page 137)

135
5
3 Press the [ENTER] button on the screen
to set JOB BUILD.
4 After “Press START button to copy after
changing settings” appears, press the
[BASIC] button.
5 On the Basic screen, set the copy mode,
e-filing/file function, and finishing mode
you want to use for the 1st job.
- Press the [SETTINGS] button to confirm the settings.
- To change the settings, press the [FC] button, and then start the
procedure again from step 1.
Note that the settings for mixed sized originals, paper size to be
copied, finishing mode (unselectable for mixed sized originals),
image shift, book centre erase, 2IN1/4IN1, time & date stamp, page
numbering, image direction, book <-> tablet, e-filing/file function
cannot be changed for each job, respectively.
6 Press the [START] button.
- Scanning the originals of the 1st job starts.