Tricity Bendix CSI 2500 - Manual (Page 14)

Note: When the automatic timed period starts,
the oven indicator neon will cycle ON and OFF
during cooking.
B)
i) Ensure the electricity supply is switched ON
and that the correct time of day is displayed,
e.g. 10.00am. Fig.9.
ii) Place food in oven.
iii) To set the length of Cooking Time press the
cooking hours button ( ) while holding it
down, press the increase control (+) until the
cooking time is displayed, e.g. 2 hrs 15 mins.
Fig. 10.
iv) Release the buttons. The AUTO display will
glow and the time of day will be displayed
after 5 seconds.
v) Set the oven temperature. The oven indicator
neon should be ON.
vi) To check the stop time during the cooking
period, simply press the stop time button and
the stop time ( ) will be displayed. Fig.11.
4. RETURNING THE COOKER TO
MANUAL OR TO CANCEL AN
AUTOMATIC PROGRAMME.
At the end of a timed cooking period, the AUTO
light will flash and a bleeper will sound for up to 2
mins. This can be stopped by pressing any of the
buttons. Fig. 12.
Turn the oven temperature control to the OFF
position. The AUTO display will continue to flash.
Press ( ) button. The AUTO display will go out
and the cooking symbol will light ( ) Fig. 13.
Turn the oven control ON to check that the oven
operates manually. The oven indicator neon will
glow.
Turn all oven controls OFF. No indicator neons
should be illuminated.
14
TO SET THE TIMER TO SWITCH OFF ONLY
9.
13.
12.
11.
10.