TAG DVD32FIR - Manual (Page 21)

future expansion
|
41 40
|
future expansion
advanced control with AV32R (1)
The PSM192 has many advanced options which
can be controlled via a TAGtronic connection
between DVD32FLR and AV32R. These include
individual black level (brightness), white level
(contrast), colour and hue (NTSC only) picture
settings for each video source. The picture
settings may be applied automatically whenever
the associated source is selected on the AV32R.
The AV32R can also control the PSM192 to
automatically select the PSM192 external
composite or S-Video input when composite or
S-video sources are selected on AV32R, two
connections between the AV32R composite and
S-video outputs and the PSM192 composite and
S-video inputs then allow you to obtain
progressively scanned output for all your video
sources.
1. requires AV32R software version v3.7 or later
software upgrades distributed via the internet
One of the most flexible aspects of DVD32FLR is that the software is stored in re-
programmable memory. The software can be upgraded using a PC connected via the
TAGtronic Communication Bus.
Details of our future upgrades will be published on our website, www.tagmclaren.com, and
the updates themselves will be downloadable for user installation via a PC.
The PSM192 has a special mode to display 4:3 video signals on a 16:9 widescreen display.
If your display is configured as 16:9 in the player menus, you can use the PSM192 to add
black bars at the sides of 4:3 images so that they are centred within your 16:9 display. This
is controlled by pressing shift then display on the system remote, press them once to turn on
the black bars for 4:3 input signals, press again to remove them for 16:9 input signals. The
external composite and S-Video inputs have black bars active by default (i.e. they expect a
4:3 input by default), press shift then display to turn the bars off if the input signal is 16:9.
To select the external composite video input to PSM192, press shift then 1 on the system
remote. The front panel display will show “PSM192” on the large display area and
“composite” on the lower dot matrix area when the external composite video input is
selected, the “composite” text will remain on the dot matrix area of the display as long as the
composite input is selected.
To select the external S-Video video input to PSM192, press shift then 2 on the system
remote. The front panel display will show “PSM192” on the large display area and “S-
Video” on the lower dot matrix area, the “S- Video” text will remain on the dot matrix area
of the display as long as the S-Video input is selected.
To select the internal DVD connection press shift then 3 on the system remote. The front panel
display reverts to its normal operation.
selecting PSM192 inputs
4:3 mode for 16:9 displays
GRR00868.01-DVD32RFLR UM 5/30/02 12:26 PM Page 40