Tascam HS-4000 - Manual (Page 83)

TASCAM HS-4000
83
10 – Internal settings
*1: This AES31 file is automatically created
*2: This PPL file is automatically created
These files are created automatically when you save a session or
playlist, but they are not shown when the file structure is viewed
on the unit.
NOTE
・ Poly files are created directly in the session folder.
・ With mono files, subfolders are created inside the session folder for each
take. When the Mono File Place setting is SubFolder , files are
created in the take subfolders. When the setting is Session Root , files
are created directly in the session folder.
CAUTION
・ Even when Mono File Place is set to Session Root , subfolders are
created and management files are stored in them. Do not erase these
subfolders.
・ Other management files and folders are created in addition to these.
File names
The format used in naming files is as follows.
1–4 track poly files
[Take name first half]-[letter][take number].wav
1–4 track mono files (planned for a future firmware
version upgrade)
[
Take name first half]-[letter][take number]_[track number].wav