Toshiba VIRTUALTECH C6609-1201M1 - Manual (Page 44)

44 Getting Started
Setting up your computer
5.375 x 8.375 ver 2.3.2
Removing a memory module
To remove the memory module:
1 Turn the computer off and remove all cables connected to
the computer.
CAUTION: Do not try to remove a memory module with the
computer in Standby or Hibernation mode. You can damage the
computer and the memory module.
2 Turn the computer upside down and remove the main
battery module.
3 Remove the two screws securing the memory module
cover and store them in a safe place.
4 Lift off the cover.
5 Remove the screw that secures the memory module.
6 Fit two slender objects such as tweezers under the
memory module on each side of the connector and pry up
to disconnect the module.
7 Grasp the memory module by the sides and lift it out.
CAUTION: Do not touch the connectors on the memory module or
on the computer. Debris on the connectors may cause memory
access problems.
8 Seat the cover and secure it with the two screws.
Connecting a mouse
You may want to use a USB-compatible mouse instead of the
TouchPad, the computer’s built-in pointing device.