Top Innovations SF-777 - Manual (Page 9)

9
Clearing & Cleaning the Appliance
To CLEAR the iron if clogged or prior to storing:
STEP ONE
Turn the Temperature Control Dail to the maximum setting. Wait until the red
indicator light shuts off.
STEP TWO
Hold the iron at arm’s length away from your body and any other surface.
Point the tip of the iron at the floor being careful not to point the soleplate
toward your body.
STEP THREE
Depress the Steam button for 5 seconds and release. Then raise your arm
quickly so the metal soleplate is facing away from you. Press the Steam
button for an additional 5 seconds and then release.
STEP FOUR
Wait half a minute and repeat the above process. This should clear the unit in
preparation for storate or if clogged.
DANGER: Make sure that there is several feet of clear space in front and
behind you since there may be a lot of steam released. It is desireable to
clean the steam iron over a sink or basin.
To CLEAN the outside of the appliance:
STEP ONE
UNPLUG the appliance from the power source. Allow the iron to cool
completely.
STEP TWO
Once cooled, place the iron face down on the non-slip iron rest on the top of
the water reservoir tank. Set the system on a flat, level surface.
STEP THREE
Wipe the outside of all surfaces, except the metal soleplate of the iron, with a
damp sponge. You may use mild soap or detergent for difficult to clean areas.
DO NOT use abrasive cleansers as these will mar the plastic surfaces. You
may dust the metal soleplate with a dry, clean cotton cloth.