Toshiba IK-VR01A - Manual (Page 4)

- 3 -
1. FEATURES & DESCRIPTION
IK-VR01A has the following features:
(1) Flush/Surface mount.
(2) IP66 Standard for dust and water resistance.
(3) Built in vari-focal lens with auto-iris
Focal length 3.0~8.0mm.
(4) Incorporated 1/3" type CCD image sensor gives high resolution and excellent
sensitivity
480 lines horizontal resolution
0.4 lx minimum illumination with tint dome cover
(5) 50dB Signal-To Noise Ratio
(6) Power supply- AC24V or DC12V - This camera automatically detects the power.
(7) BLC, AGC, and Line-Lock (AC24V)
2. CAUTIONS
(1) Avoid touching the lens glass with your fingers. If necessary, use a soft cloth
moistened with alcohol to wipe off any dust.
(2) Avoid aiming the camera at the sun.
(3) Avoid shooting the camera at intense light. Intense light such as a spotlight may
cause a bloom or smear. A vertical stripe may appear on the screen.
However, this is not a malfunction.
(4) Install the camera away from video noise. If cables are wired near electric lighting
wires or a TV set, noise may appear in images. In this event, relocate cables or
reinstall equipment.
3. COMPONENTS
(1) Camera (with Tint Dome Cover installed) 1 pc.
(2) Accessories
(a) Mounting Base 1 pc.
(b) Bracket 1 pc.
(c) Screw A 3 pcs.
(d) Screw B 3 pcs.
(e) Clear Dome Cover 1 pc.
(f) Special Hexangular Wrench 1 pc.
(g) Monitor Out Harness Wire 1 pc.
(h) Power Connector 1 pc.
(i) Instruction Manual 1 pc.