Care and maintenance of your fingerprint reader, Care and maintenance of your, Fingerprint reader – Toshiba A200 User Manual

Page 168

Advertising
background image

168

Toshiba Utilities

Fingerprint Authentication Utility

3

Select Registrations.

4

Select a registration.

5

Click Delete.

How to Delete the Fingerprint Data

Fingerprint data is stored in the non-volatile memory. If the
computer changes ownership, Toshiba recommends the following
procedure:

1

Click Start, All Programs, Protector Suite QL, and then
Control Center.

The Protector Suite Software screen is displayed.

2

Click Fingerprints then Delete.

3

Click Settings then Fingerprint Storage Inspector.

The Fingerprint Storage Inspector screen is displayed.

4

If other fingerprint data is still displayed on the list, hold down
the

Ctrl

key and select each fingerprint until they are all

selected, then click Remove.

5

Click OK to make the changes permanent.

6

Check that all Fingerprint data was deleted on the Fingerprint
Storage Inspector screen.

Care and maintenance of your fingerprint reader

Failure to follow these guidelines and/or procedures might result in
damage to the reader or cause reader failure, finger recognition
problems, or lower finger recognition success rate.

❖

Do not scratch or poke the reader with your nails or any hard or
sharp objects.

❖

Do not press the reader with too much pressure.

❖

Do not touch the reader with a wet finger or any wet objects.
Keep reader surface dry and free of water vapor.

❖

Do not touch the reader with a soiled finger. Minute foreign
particles on a soiled or dirty finger may scratch the reader.

❖

Do not paste stickers or write on the reader.

❖

Do not touch the reader with a finger or any object with built-
up static electricity.

Advertising