TDK Powereta iQP Series - Manual (Page 3)

Data Sheet: Powereta
TM
iQP Series –Single Output Quarter Brick
©2005-2006 TDK Innoveta Inc.
iQP 12V/21A Datasheet 8/3/2006 ℡ (877) 498-0099
3/15
Mechanical Specification:
Dimensions are in mm [in]. Unless otherwise specified tolerances are: x.x ± 0.5 [0.02], x.xx and x.xxx ± 0.25 [0.010].
Pin Assignment:
PIN FUNCTION PIN FUNCTION
1 Vin(+) 6 Sense(-)
2 On/Off 7 Trim
3 Vin(-) 8 Sense(+)
4 N/A 9 Vo(+)
5 Vo(-) 10 N/A
Pin base material is copper or brass with matte tin plating; the maximum module weight is 60g (2.1 oz).
1.02 [.040] DIA Pins
1.78 [.070] DIA Stand-offs
4 Pins
1.02 [.040] DIA
2 pins
1.52 [.060] DIA
2 pins
M3 X .5 threaded
inserts, 2 places
Recommended hole pattern (top view)
3.40 [0.134] max Dia
2 places
2
3
1
5
7
6
8
9