Topcom 4011C SIM User Manual
Page 16
16
Topcom Butler 4011/4011C Sim
Topcom Butler 4011/4011C Sim
4.14.2 Adding a number and a name to the Phone Book
•
Press the Programming key
.
•
Press the Up or Down key
repeatedly until ‘PHONE BOOK’ appears on the display.
•
Press the Programming key
.
•
‘SEARCH‘ appears on the display.
•
Press the Up or Down key
repeatedly until ‘ADD NEW’ appears on the display.
•
Press the Programming key
.
•
‘NAME‘ appears on the display.
•
Enter the name. Use the alphanumeric keys.
•
Press the Programming key
.
•
Enter the telephone number. Use the alphanumeric keys.
•
Press the Programming key
.
•
You will hear a long beep. The name and the number are stored in the Phone Book.
4.14.3 Looking up a number in the Phone Book
•
Press the Programming key
.
•
Press the Up or Down key
repeatedly until ‘PHONE BOOK’ appears on the display.
•
Press the Programming key
.
•
‘SEARCH‘ appears on the display.
•
Press the Programming key
.
•
Enter the first letters of the desired name.
•
Press the Programming key
.
•
The first name, corresponding with these letters appears on the display.
•
Press the Up or Down key
to browse for other numbers in the Phone Book.
•
Once the desired number appears on the display, the number will be automatically
dialled once the Line key
is pressed.
4.14.4 Changing a name or number in the Phone Book
•
Press the Programming key
.
•
Press the Up or Down key
repeatedly until ‘PHONE BOOK’ appears on the display.
•
Press the Programming key
.
•
‘SEARCH‘ appears on the display.
•
Press the Up or Down key
repeatedly until ‘EDIT’ appears on the display.
•
Press the Programming key
.
•
The first number in the Phone Book appears on the display.
•
Press the Up or Down key
until the desired number appears on the display.
•
Press the Programming key
to change the selected number programmed into the
memory.
•
Press the Delete key
to delete each letter of the name and use the alphanumeric
keypad to enter the correct name.
•
Press the Programming key
.
You can also change the character table during editing or adding names by
pressing the ‘#’-key.