TrekStor DataStation maxi g.u - Manual (Page 9)

– 8 – – 9 –
EN
OPERATING INSTRUCTIONS
Thank you for buying the TrekStor DataStation. We are confident that this product will be the source of much enjoyment.
System requirements
Windows® Vista/XP/2000, Mac® OS X:
No additional drivers are necessary for these operating systems. If you use Windows® 2000, make sure that you have installed at
least service pack 4; Windows® XP requires service pack 2 or above.
1) Startup
• Connect the provided power cable (if available) to the power supply, and plug the power supply into a socket. Connect the
power supply to the "P
ower
" connection of the DataStation.
• Only use the provided USB connection cable to connect the device to a USB port in your PC.
• Turn on the DataStation by briefly pressing the on/off button ) or by actuating the on/off switch ) . Your operating
system will automatically recognize the DataStation, and add the DataStation as a "l
oCAl Disk
" (or "l
oCAl Drive
")
to "m
y ComPuter
"/"C
omPuter
" (Microsoft® Windows) or the "D
esktoP
" (Mac® OS X and Linux®).
• Hold down the on/off button ) or actuate the on/off switch ) to turn off the DataStation.