Tiger Shark User Manual
Page 6
c. Unscrew the bolts on the ‘T’ of the Handle Bar and place the Grips into the Handle Bar and screw
in the bolts to secure the grips.
3. Turn the Power Switch to the on position. A red light will appear.
4. Before operating your scooter check the following to make sure they are secure and intact:
Tires
Check for wear, that the bolts are securely fastened, tire pressure is 85 PSI,
and that they are in alignment.
Throttle
While the scooter is Off (O) apply the Throttle and release; check to make
sure that the Throttle springs back to stop after you release it.
Handle Bar Cables
Check to make sure that all cables are intact and that there is not visual
damage to the cables.
Front Fork
Check for visual damage; make sure that all bolts are securely fastened.
5. The most important thing to remember is to have FUN and be SAFE!
6