Toshiba TLPXC2500 - Manual (Page 20)

39
Operations
38
■ The display setting menu
Use this menu to set screen display-related items.
(The items in gray color cannot be set with the current input selection.)
Language
Up/down
shift
Background
Icon
Blackboard
mode
Start-up screen
User logo
(Full): Display with 1024 × 768 dot resolution
(Thru): Display with sampling resolution (for computer input only)
(Wide): Wide-screen display
Lets the projected image shift vertically when the screen size setting
is wide display (within the range of 1024 × 768).
When projecting on a non-screen surface, select a color in accordance
with the projecting surface.
Press and switch with and . Off/Green/Black/Brown/Blue/Beige
Select one of the languages below to use for displaying the menu and messages
[ or : Enter setting mode] [ :Selection] [Apply: ]
English/Français/Deutsch/Italiano/Español/Português/ /
Svenska/Türkçe/Polski/ / / /
Screen to display when there is no input signal
[ or : Enter setting mode] [ :Selection] [Apply: ]
Logo/Blue/None
Display icons as function guides On Off
Display start-up screen when power is turned on On Off
Display a logo customized by the user for the start-up screen or when
there is no input signal.
[ or : Enter setting mode] [ : Selection]
Logo registration Press to display the registration menu.
Display style
Background Black Blue White
Logo confirmation Press .
Reset logo Yes No
Description Item
Screen size
Detailed description
[Screen size]
• If “Thru” is selected for [Screen size], portions exceeding the native resolution
(1024 × 768 pixels) will not appear on the screen. Note that for RGB signals with
clock frequency 140MHz or lower, all input pixel signals are sampled. However, if
the clock speed is higher than this, the RGB pixel signal is thinned before
sampling.
Item Description Computer Y/P B /P R Video S-video
Camera
(XC2500)
Position V-position Yes No No No No
Adjust the vertical position of the image.
Clamp 1 Yes No No No No
Adjusts the clamp pulse position.
Clamp 2 Yes No No No No
Adjusts the clamp pulse width.
*1: [Noise reduction] may not work depending on signal type.
*2: [[NTSC mode] can be displayed and adjusted only when the video signal is set to [NTSC] or
[NTSC4.43]. NTSC mode is set to JAPAN when the language is set to Japanese. It is set to US for
other languages.
Using the menus (Continued)