Topcom BPM Wrist 1480 - Manual (Page 9)

9
TOPCOM BPM ARM 1480
ENGLISH
10 Measurement
10.1 Important
1. This monitor automatically switches off 1 minute after the last key
operation.
2. To interrupt the measurement, simply press any key. The cuff will deflate
immediately after a key is pressed.
3. During the measurement, do not talk or move your arm or hand muscles.
10.2 Procedure
1. Press the START/STOP button to
start measurement. All segments
will appear on the display. The cuff
will inflate to the level that is right for
you.
2. When the right level is reached, the
cuff will deflate.
3. When the measurement is
completed, systolic, diastolic and
pulse will be shown simultaneously
on the LCD screen. The result will
be saved automatically in the
memory system. Up to 48 results
can be saved. If the memory is full,
the oldest data will be erased
automatically.
When a mistake was detected
during measurement the Error
mark appears on the display
ERROR