Problem: tv does not work – Team Products PMP3000 User Manual

Page 6

Advertising
background image

PMP3000 Models

Owner’s Manual

9

Specifications:
Maximum Continuous Power

3000 Watts

Surge Capacity (Peak Power)

6000 Watts

Max Power Efficiency

>80%

Waveform

Modified Sine Wave

No Load Current Draw

<2A

Input Voltage Range

11-15VDC

AC Receptacles

120V AC, Grounded

Fuse

15 x 30 amp (spade type)

Weight

18.5 lbs.

Dimensions

19.9” (L) x 9.055”(W) x 6.14” (H)

505mm(L) x 230mm(W) x 156mm(H)

Questions?

If you have any questions about this product, please contact our Customer

Service Department at (888) 231-4022, Monday through Friday, 9 AM to 5 PM

EST, or visit our website at www.colemanpower.com.

10

Reason

Solution

Electrical interference from

Add an AC interference filter on

the inverter.

to the TV power cord. Refer

to TV and audio section of

this manual.

Reason

Solution

TV does not turn on.

Try turning the inverter

ON/OFF/ON.

Contact TV manufacturer for

start up surge and power

consumption.

A larger inverter may

be required.

PROBLEM: TV Does Not Work

Reason

Solution

Input voltage below 10.5 ± 0.5 volts.

Keep input voltage above 10.5±0.5

volts to maintain regulation.

Poor or weak

Recharge or

battery condition.

replace battery.

Inadequate power being

Make sure connection is secure.

delivered to the inverter

Use lower gauge wire. Keep

or excessive voltage drop.

wire length as short as possible.

Troubleshooting

PROBLEM: TV Interference

PROBLEM: Low Battery Alarm On All The Time

Advertising