Toshiba DKT3000/2000 - Manual (Page 62)

Advanced Operation
Speed Dial
48
Strata CTX DKT3000/2000-Series Telephone 05/02
Storing a Station Speed Dial Number
There are three ways to store a Station Speed Dial number, including Programming
Mode, Access Codes and through system programming by your CTX System
Administrator.
➤
To store a Station Speed Dial Number using User Programming Mode
1. Press  to enter User Programming Mode. The LCD shows “USER PROG
MODE.”
2. Press the fixed 6SGLDO button or the Speed Dial feature button. The LCD shows
“SPEED DIAL MODE.” If this display does not appear, see your CTX System
Administrator to determine if Speed Dialing memory is assigned to your
telephone.
3. Press  . The LCD shows “INDEX NUMBER.”
4. Enter the two digits which, combined with the  , form the Station Speed Dial
Number.
Example: Entering  would result in storing Station Speed Dial Number  .
The LCD shows this number in the upper left corner. If there is already a number
stored, it appears below the Speed Dial Number.
5. Enter the desired destination. It appears in the lower right of the LCD. Instructions
are given below for more complex dialing strings, usually telephone numbers.
6. Press the fixed 6SGLDO button or the Speed Dial feature button. The LCD shows
“DATA PROGRAMMED.”
7. If you want to enter another number, press the fixed 6SGLDO button or the Speed
Dial feature button. The LCD shows “SPEED DIAL MODE.”
8. Pressing
6SGLDO
or the Speed Dial feature button again toggles you between User
Programming and Speed Dial mode. Lift and replace the handset to exit User
Programming altogether.
➤
To store a Station Speed Dial Number using an Access Code
1. Dial  . The display shows “SPEED DIAL” and you hear Entry Tone.
2. Dial the Station Speed Dial number (100~199). The LCD shows your digits and
you hear Entry Tone.