Topcom BUTLER 4200 User Manual
Page 13
Topcom Butler 4200/Twin/Triple/Quattro
13
Topcom Butler 4200/Twin/Triple/Quattro
ENGLIS
H
4.11
Pause Key
During Block dialling, you can add a pause between two digits by pressing the Redail/Pause
key for 2 seconds.
4.12 Warning tone beep
When one handset is on line, it emits the warning tone beep every 20 seconds if the batteries
are low or when the handset is out of range.
4.13 Caller identification
Caller identification is only available if you have subscribed to this service with your
telephone operator.
When you receive an external call, the caller’s number will appear on the display as the
telephone rings.
If the caller’s number is already recorded in the phone book, the caller is identified by his or
her name recorded in the phone book instead.
If the call is not answered for 3 seconds, the sum of unanswered calls will be displayed and
CLI icon
of the handset appears.
The handset indicator LED and base CID LED
blinks till all missed calls are read.
4.13.1 List of calls
Your telephone keeps a list of the last 20 calls received in memory. This function is available
only if you are subscribed to the caller ID information. The correspondents that have called
are identified by their telephone number or name in the same way as in caller identification.
The presence of new / unanswered calls is indicated by the flashing of CLI LED
of the
base and Handset indicator LED. To consult the list of calls:
1.
Press and hold
key for 2 seconds or choose menu Call Log. If there are no calls in
the list, ‘NO CALL’ will appear.
2.
Scroll through the calls by using up
or down
arrows. The caller’s name will be
shown before the telephone number if the name is stored in the phonebook. If this call
is unanswered or this call record is not read, CID icon
is shown.
3.
Note: if the caller’s name is longer than 9 characters or the telephone number is
longer than 9 digits, press down
arrow to see the complete name or number.
4.
Press down
again to see the time and date when the call is received**
5.
Press
to add this entry in the phonebook when the telephone number is on display
if it’s not already stored:
–
‘STORE ?’ will appear, press
to confirm. Enter the name and press
to
confirm. Enter the telephone number and press
to confirm. Select the
melody which will be heard when this number is calling using up/down keys and
press
to confirm. The entry will be stored in the phonebook.
6.
To call back a correspondent, simply press the key
when their telephone number
or name is displayed.
The telephone does not show the name sent by the operator.
INT
OK
INT
OK
INT
OK
INT
OK