Topcom BUTLER 2600 - Manual (Page 32)

5.1.2 Call setup with dial preparation
• Enter the desired telephone number. An incorrect number can be
corrected by means of the Mute button . When you haven’t
pressed a button for 60 seconds, the number you’ve already
entered will disappear and the handset returns to standby mode.
• Press the Line button . The number will be dialled
automatically.
• Press the Line button when you want to terminate the call.
5.2 Incoming calls
• When a call comes in, the handset and base will start
to ring. The EXT symbol and the handset indicator LED will blink.
• Press the Line button to answer the incoming call.
• When you pick up the handset from the base unit you are
immediately connected to the caller. You do not need to press the
Line button
.
5.3 Last number redial
• Press the Line button .
• Press the Redial button . The last number (with max. 20 digits)
will be dialled automatically.
• Press the Line button when you want to terminate the call.
5.4 Programming memory numbers
You can program 10 indirect numbers (of max. 20 digits) in the phone’s memory.
• Press the Memory button
, followed by memory location (0-9).
• Enter the telephone number you wish to save on this memory
location.
• Press the Memory button . You will hear a confirmation tone.
Remarks :
•
If you wish to insert a pause, press the Redial/Pause button /P on the
location where you want a pause
5.5 Calling a memory number
• Press the Line button .
• Press the Memory button , followed by the number of the
memory location (0-9).
• The memory number will be dialled automatically.
• Press the Line button
when you want to terminate the call.
5.6 Mute function
It is possible to deactivate the microphone during a conversation. Now you can speak openly without being
heard by your correspondent.
• Press the Mute button
during a conversation. The microphone
will be deactivated. The MUTE symbol appears on the display.
• Press the Mute button again when you want to continue the
conversation.
Butler 2600/DUO
32
B2600_DUO_scan.QXD 16-09-2004 09:54 Page 32