Removing a memory module – Toshiba A45 User Manual
Page 72
72
Getting Started
Installing additional memory (optional)
5.375 x 8.375 ver 3.1
When the panel is properly positioned, it will snap down
into place.
12
Turn on the computer.
To verify that the computer correctly recognizes the
memory, see
“Checking total memory” on page 74
.
13
If the computer does not recognize the memory, shut
down the computer, remove the keyboard and make sure
the memory module is seated properly, as described in
step 7.
Removing a memory module
If you use the computer for a long time, the memory modules
will become hot. If this happens, let the modules cool to room
temperature before you replace them.
Do not try to remove a memory module with the computer
turned on. You can damage the computer and the device.
Do not remove the memory module while the computer is in
Standby mode. The computer could hang up the next time you
turn it on and data in memory will be lost. In either of the
above cases, the Standby configuration will not be saved.
The following message appears when you turn on the power:
Warning: Resume Failure
Press Any Key To Continue
If the computer hangs up when you turn it on, perform the
following: Press the power button and hold it down for five
seconds until the power turns off, then turn the power on
again.
1
Follow steps 1 through 5 in