Document Outline

• Contents
• About this User’s Guide
  • Used symbols
  • Terminology
  • Documentation and software updates
• 1 Getting to know your SpeedTouch™
  • Introduction
  • Installation
  • Configuration
  • Before you begin
  • 1.1 SpeedTouch™ LED Behaviour
    • Front panel LEDs
  • 1.2 Accessing your SpeedTouch™
    • Access methods
    • 1.2.1 Access via the Web Interface
      • To access the SpeedTouch™ via the Web interface
    • 1.2.2 Access via CLI
      • To access the SpeedTouch™ via the Command Line Interface (CLI)
      • To start a Telnet session
    • 1.2.3 Access via FTP
      • To access the SpeedTouch™ via the File Transfer Protocol (FTP)
      • File system
      • To open an FTP session
      • File system structure
      • File system access rights
      • Common FTP commands
      • FTP file transfer
      • Quote site command
    • 1.2.4 Remote Assistance
      • To access the SpeedTouch™ remotely
      • To enable remote access
      • To disable remote access
• 2 Local Network Setup
  • Introduction
  • Device settings
  • 2.1 Wired Ethernet
    • Local network
    • Standard wiring procedure
    • Ethernet link check
    • Device settings
    • Managed Ethernet switch
  • 2.2 USB
    • Supported operating systems
    • System requirements
    • Prerequisites
    • To install Windows USB drivers
    • To verify USB connectivity in Windows
    • To install Mac USB drivers
    • Device settings
  • 2.3 Wireless Ethernet
    • Introduction
    • Wireless client requirements
    • 2.3.1 Wireless Basics
      • 802.11b/g
      • Wireless Fidelity
      • Access Point
      • Network Name or SSID
      • Radio channels
      • Antennas
    • 2.3.2 Connecting Wireless Clients for the First Time
      • Wireless default settings
      • To prepare wireless clients for the first time
      • To configure wireless clients for the first time
      • First-time association example
    • 2.3.3 Wireless Security
      • Introduction
      • Security settings
      • Network Name (SSID)
      • Access Control List (ACL)
      • Data encryption
    • 2.3.4 Connecting Additional Wireless Clients
      • Preconditions
      • Security issues
      • Registering wireless clients
      • Registering clients via Web pages
      • Registering clients via the association button
    • 2.3.5 Extending the Range of Your Wirelstess Network
      • Wireless Distribution System (WDS)
      • Preconditions
      • To configure WDS
• 3 Internet Connectivity Dial-In Clients
  • Introduction
  • Access methods
  • Connection protocols
  • Dial-in clients
  • Embedded PPP dial-in clients
  • Broadband host PPPoE dial-in clients
  • 3.1 SpeedTouch™ Web Pages
    • Introduction
    • Starting an Internet session
    • Monitoring your Internet connection
    • Terminating an Internet session
  • 3.2 Internet Gateway Device Control Agent
    • Introduction
    • Preconditions
    • Starting an Internet session
    • Internet connection status
    • Terminating an Internet session
• 4 Voice over IP
  • Voice over IP
  • The SpeedTouch™ VoIP solution
  • Multi-line service
  • Fax
  • Call agent
  • 4.1 Telephony Setup
    • Telephony installation
    • Telephony configuration
    • Enable the telephony service
    • Configure the telephony service
    • Verifying telephone connectivity
  • 4.2 Supplementary Telephony Services
    • Supported telephony services
    • Using the services on the phone
    • Command overview
• 5 SpeedTouch™ Web Interface
  • SpeedTouch™ documentation
  • 5.1 Navigation
    • Navigation components
    • 5.1.1 Menu
      • Menu items
      • Collapsing and expanding the menu
    • 5.1.2 Language Bar
      • Language bar
    • 5.1.3 Navigation Bar
      • Navigation bar
      • Display level
    • 5.1.4 Notification Area
      • Notification area
    • 5.1.5 Tasks
      • Tasks
  • 5.2 Home
    • SpeedTouch™ home page
  • 5.3 SpeedTouch
    • The SpeedTouch menu
    • The SpeedTouch page
    • 5.3.1 Information
      • Information
    • 5.3.2 SpeedTouch™ Easy Setup
      • Easy Setup Wizard
    • 5.3.3 Restart
      • Restarting your SpeedTouch™
    • 5.3.4 Configuration
      • Overview
      • Details
      • Configure
    • 5.3.5 Back up & Restore
      • Introduction
      • Accessing the Backup & Restore page
      • Saving your current configuration
      • Restoring a previously saved configuration
    • 5.3.6 Reset to Factory Defaults
      • Introduction
      • Resetting the SpeedTouch™ factory defaults
    • 5.3.7 Event Logs
      • Event Logging
      • Recorded Events
      • Category
  • 5.4 Broadband Connection
    • The Broadband Connection menu
    • The Broadband Connection page
    • 5.4.1 Connectivity Check
      • Introduction
      • Checking your Internet connectivity
      • Analysing the test results
    • 5.4.2 DSL Connection
      • Overview
      • Details
    • 5.4.3 Internet Services
      • Internet Services information
    • 5.4.4 Internet Service Settings
      • Accessing the Internet Service Settings page
      • Overview
      • Details
  • 5.5 Toolbox
    • The Toolbox menu
    • The Toolbox page
    • 5.5.1 Remote Assistance
      • Enabling Remote Assistance
      • Terminating remote assistance
    • 5.5.2 Telephony
      • Introduction
      • Overview
      • Configure
      • Expert Configure
    • 5.5.3 Game & Application Sharing
      • Overview
      • Configure
    • 5.5.4 Defined Games & Applications
      • Accessing the Defined Games & Applications page
      • The Defined Games & Applications page
    • 5.5.5 Game or Application Definition
      • Accessing the Game or Application Definition page
      • Overview
      • Configure
      • Adding a Port Translation rule
    • 5.5.6 New Game or Application
      • Creating a new game or application
    • 5.5.7 Parental Control
      • Parental Control
      • Overview
      • Configure
      • Content levels
      • Deny access to a specific Web site
      • Allow access to a specific Web site
      • Redirect a Web site
      • Redirecting all Web sites
      • Configure content based filtering settings
    • 5.5.8 Web Filtering Activation
      • Accessing this page
      • Web Filtering Activation page
      • Standard license activation
    • 5.5.9 Content Level
      • Accessing the Content Level page
      • Overview
      • Configure
    • 5.5.10 New Content Level
      • Accessing the New Content Level page
      • Procedure
      • Content level creation
      • Content level configuration
      • Content level definition
      • Content level activation
    • 5.5.11 Firewall
      • About the firewall
      • Overview
      • Configure
      • Security Levels
      • Details of a security level
      • Creating a new security level
      • Editing a security level
    • 5.5.12 Intrusion Detection
      • Intrusion Detection
    • 5.5.13 Dynamic DNS
      • Dynamic DNS
      • Overview
      • Configure
    • 5.5.14 User Management
      • Overview
      • Configure
      • Types of users
    • 5.5.15 Edit User
      • Editing a user account
    • 5.5.16 Change Default User
      • The Default User page
      • Changing the default user
    • 5.5.17 Add User
      • Adding users
  • 5.6 Home Network
    • Home Network Menu
    • The Home Network page
    • Viewing (wireless) client information
    • Viewing Telephony information
    • 5.6.1 Devices
      • Overview
      • Configure
    • 5.6.2 Device Settings
      • Accessing the device settings page
      • Overview
      • Configure
    • 5.6.3 Assign Public IP
      • Introduction
      • Assigning the public IP address to a device
    • 5.6.4 Wireless Device Settings
      • Availability
      • Accessing the wireless device settings page
      • Overview
      • Configure
    • 5.6.5 Access Point Settings
      • Availability
      • Accessing the Access Point settings
      • Overview
      • Details
      • Configure
      • WEP
      • WPA-PSK
      • Access control on the SpeedTouch™
      • Allowing new wireless
    • 5.6.6 Configuring WDS
      • Availability
      • What is WDS
      • Configuring WDS
      • Establishing a WDS connection
    • 5.6.7 Interfaces
      • Interfaces overview
    • 5.6.8 Interface Settings
      • Overview
      • Configure
      • Assigning a new IP address to the SpeedTouch™
    • 5.6.9 DHCP Pool
      • DHCP Pool page
      • Accessing the DHCP Pool page
      • Components of the DHCP Pool page
• 6 Troubleshooting
  • Introduction
  • Topics
  • 6.1 General SpeedTouch™ Troubleshooting
    • SpeedTouch™ does not work
    • SpeedTouch™ unreachable
    • Poor SpeedTouch™ performance
    • 6.1.1 Wired Ethernet Troubleshooting
      • LAN LED does not light up
    • 6.1.2 Wireless Ethernet Troubleshooting
      • Not able to connect wireless clients
      • No wireless connectivity
      • Poor wireless connectivity or reach
  • 6.2 UPnP™ on Windows XP Systems
    • SpeedTouch™ not detected by UPnP™ or IGD Control Client
    • Adding UPnP™
    • Adding IGD Discovery and Control
  • 6.3 Voice over IP Troubleshooting
    • Introduction
    • Calling over VoIP
    • Calling over PSTN
  • 6.4 Reset to Factory Defaults
    • Resetting your SpeedTouch™
    • Software reset
    • Hardware reset
• Need more help?