Rear mounting using the vesa interface, Vesa mounting options – Tyco Electronics 1928L User Manual
Page 25
2-11
Rear Mounting Using the VESA Interface
1
If the display is already connected to a pedestal, remove the four screws that connect the
pedestal to the display (refer to Figure2-1 , item
1
). Separate the pedestal from the display.
2
Reinstall the four screws into the VESA interface mount. Ensure that the monitor is
positioned with the correct side up.
3
Mount the monitor to the wall according to the template shown in Figure 2-2. Route the
cables through the cable access opening (Figure2-2, item
1
).
Figure 2-2: Rear mount template (not to scale)
VESA Mounting Options
The following companies provide VESA mounting devices compatible with your touchscreen
monitor:
GCX
800-228-2555
707-773-1100
www.gcx.com
Ergotron
800-888-8458
651-681-7600
www.ergotron.comˆ
Innovative Office Products
800-524-2744
610-253-9554
www.innov-office-prod.com
MRI
800-688-2414
www.mediarecovery.com
1